+420 776 854 635

Filament ASA - 1,75 mm - XXL BLACK Volkano - 2500 g Print With Smile

€63.00

ASA is an ideal material for printing details exposed to weather conditions. In addition, ASA is chemically resistant, temperature-stable and has antistatic properties. Like ABS, it‘s a petrochemical material, but due to the lack of butadiene in its composition, it‘s characterised by significantly less shrinkage, which is much easier to print.

PROPERTIES

  • Good adhesion between layers
  • Material for advanced users
  • Matt-finish after printing
  • Does not floss
  • High accuracy of printed part dimensions
  • High impact strength and mechanical strength
  • Resistance to UV radiation and weather conditions

HOW TO PRINT?

  • Recommended print temperature: 220-250 °C
  • Heating pad 80-120 °C
  • Material flow: 100-103 %
  • Retraction: ± 5
  • Nozzle diameter: >= 0.1 mm
  • Print speed: 30-80 mm/s

ASA is an ideal material for printing details exposed to weather conditions. In addition, ASA is chemically resistant, temperature-stable and has antistatic properties. Like ABS, it‘s a petrochemical material, but due to the lack of butadiene in its composition, it‘s characterised by significantly less shrinkage, which is much easier to print.

PROPERTIES

  • Good adhesion between layers
  • Material for advanced users
  • Matt-finish after printing
  • Does not floss
  • High accuracy of printed part dimensions
  • High impact strength and mechanical strength
  • Resistance to UV radiation and weather conditions

HOW TO PRINT?

  • Recommended print temperature: 220-250 °C
  • Heating pad 80-120 °C
  • Material flow: 100-103 %
  • Retraction: ± 5
  • Nozzle diameter: >= 0.1 mm
  • Print speed: 30-80 mm/s

Write a review

Note: HTML is not translated!
    Bad           Good